A hidden penalty called Low Power Factor silently inflates commercial electricity bills. We fix it with a small panel called an APFC — installed next to your meter. You do nothing. The bill drops. Forever.
Every motor, compressor, AC, freezer, fridge, fan, ballast, and transformer in your shop draws two kinds of power from the grid. You use one. You pay for both.
Most shop owners never scan the bill closely. Power factor surcharges hide in plain sight — sometimes ₹2,000 to ₹8,000 per month on a mid-sized shop.
Add a new freezer, a second AC, better lighting? The hidden charge creeps up every time. Old shops pay the most.
Dirty power makes compressors run hotter, lights flicker, and motors fail sooner. You feel the symptoms long before you see the cause.
Chronic low power factor in commercial connections can trigger warnings, penalties, and in some states, disconnection by the electricity board.
An APFC panel is a small steel cabinet — roughly the size of a mini-fridge — that mounts on a wall next to your main electrical panel.
Inside, a sensor watches your shop's power usage every second. When it detects the "froth" building up, it instantly connects the right amount of capacitors to cancel it out. When the load drops, it disconnects them.
It does this 24 hours a day, 365 days a year, with no input from you. No buttons. No switches. No maintenance routine. It just quietly keeps your bill clean.
You install it once. It works for 5+ years. After payback — typically 4–10 months — every rupee saved is pure profit.
Lower bills are the headline. But the quieter wins — longer equipment life, stable lighting, more headroom — are the ones you'll notice day to day.
Penalty charges vanish. Incentive rebates (where applicable) kick in. The drop shows up on your very next bill cycle.
ACs, freezers, compressors, ballasts, and motors run cooler with clean power. Fewer breakdowns. Longer service life. Lower repair costs.
That dip in lighting every time the AC compressor kicks in? Gone. Lighting stays steady — great for salons, cafés, and theatres.
Correcting power factor frees hidden capacity in your wiring. Add a new freezer or AC without applying for a load upgrade.
Billing machines, POS terminals, CCTV, sound systems, and projectors behave better on clean, stable power.
No more warning notices. No penalty arrears. No risk of commercial disconnection for chronic low power factor.
If your shop has an AC, a freezer, lighting, or motors — and a commercial electricity connection — an APFC almost certainly pays for itself.
High lighting loads, water heaters, and constantly running ACs make salons a textbook APFC case.
Coffee machines, convection ovens, display fridges, and air conditioning add up fast. Lots of motor-driven loads.
Heavy HVAC and inductive lighting loads, with spikes when shows change. One of the highest-saving segments.
Freezers run 24/7. High continuous motor load. APFC plus good freezer health = dramatic bill drops.
Motor-heavy equipment + heavy HVAC + long operating hours. Strong savings profile, quick payback.
Large cold chain loads + bright lighting + checkout tech. Every percentage point saved is worth real money.
Exhaust motors, walk-in chillers, and industrial kitchens create perfect conditions for power factor penalties.
Fast-switching, high-variability loads. Specialized APFC with quick response is essential — and pays back fast.
24/7 industrial refrigeration = the highest ROI category. Payback often under 10 months.
Enter values from your electricity bill to see your potential ROI. Look for KVAH, KWH, and RMD readings.
These are conservative estimates based on a typical commercial tariff with 15–30% reduction after APFC installation.
Your actual savings depend on your current power factor, tariff slab, operating hours, and equipment mix.
Send last month's power bill via DM — we'll calculate your exact number within 48 hrs. Free, no obligation.
Photo of last month's power bill to our WhatsApp. That's it.
We calculate your exact savings, recommend a panel size, and share a written proposal.
Our technician installs and commissions the panel on-site. No shop closure needed.
Your very next bill reflects the savings. We follow up to confirm, then stay out of your way.
Look at your last electricity bill. Somewhere on it will be a "Power Factor" value (often near the consumption section). If it's below 0.95, you're losing money. If it's below 0.9, you're almost certainly paying a direct penalty. Send us your bill — we'll read it for you in minutes.
For a typical commercial shop, panels start from ₹15,000 and go up to ₹2,00,000 depending on load and configuration. Payback is typically 4–10 months from savings alone. We only recommend the size you actually need — no oversizing.
No. Installation takes 2–3 hours and happens during a brief planned power-off window — usually early morning or after closing time. We coordinate around your hours.
Every installation includes a post-install verification. We confirm your new power factor is above 0.98, and check your next bill together. If we were wrong about the savings, we make it right.
Almost none. The panel is designed to run unattended for 5+ years. We do recommend a visual check once a year — which we'll happily do if you're within our service area.
The panel handles normal load growth automatically — up to its design capacity. If you add a major new load (like a large freezer or second AC), send us a message and we'll advise whether the existing panel still fits or if you need a small add-on module.
Panels are built to IP42/IP55 standards with surge protection, MCCB isolation, and automatic cut-off on fault. They're designed for Indian commercial conditions — heat, humidity, grid instability, the works.
That's it. No forms. No calls. Within 48 hours, you'll get a written estimate of exactly how much you'll save, what panel size fits your shop, and how fast it pays back. Free. No obligation. No sales pressure. If the numbers don't work, we'll tell you that too.